PAS 300MF 390 Centrifugal Pump

The PAS 300MF 390 centrifugal pump has a maximum capacity of 1130m3/h, a suction/ discharge of DN300(12″), a maximum head of 29.5m, a maximum solids of 76 and a water cooled Perkins engine.

The PAS pump system consists of a centrifugal pump and a SuperDuo separator, which enables air to be separated from the liquid and be sucked by a vacuum pump – making automatic priming possible. Even with suction heights of several meters, the machine rapidly evacuates the air from the suction pipe and starts to pump. Additionally, thanks to the semi-open impeller, the PAS range is also suitable for pumping liquids with solids in suspension.

Both Atlas Copco and Varisco have decades of experience in designing and producing pumps. We have put those years of expertize into providing a solutions portfolio that works across multiple applications. The PAS MF (medium flow) range is packed with features that not only meet, but exceed the needs of the market. We are focused on an efficient, extremely versatile pump that is suitable for many industries, including construction, general dewatering and emergency applications, such as flood clean up.

PAS 300MF 390 Centrifugal Pump

PAS 300MF 390 Centrifugal Pump Features

Pump high efficiency: 60% (B.E.P.)
Rapid "dry" priming up to a height of 8.5 m (27.5 ft)
High resistance to abrasive liquids and turbid sandy waters
Semi-open impeller solids handling up to 76 mm (3")
Easy maintenance without lifting devices: hinged cover for direct access to the impeller
Wear plate cast iron or stainless steel (F10) wear plate, that is easily replaceable
Rotary vane vacuum pump lubricated with oil recovery system and coalescing filters: no contamination of the environment

Quick Spec

Maximum Capacity
1130m3/h
Suction/ Discharge
DN300(12")
Maximum Head
29.5m
Maximum Solids
76
Engine
Air Cooled Perkins
Power
92.1kW

Other products in the range: